Picture of an air loaded sanitary pressure regulator

Picture of an Air Load Sanitary Pressure Regulator

Hybrid or Automated, Jorlon Diaphragm

Angle style or inline automated or hybrid pressure reducing valves for purified water, clean utilities and media in the biopharmaceutical, pharmaceutical, food & beverage and consumer health & beauty industries.

Media prep: AWFI (ambient WFI)
Bioreactor/fermenter process input control: AWFI
Separation input and output control: AWFI
Purification input and output control: AWFI, Buffer
Clean utilities: clean steam, USP PW, WFI, CIP, large volume CCA, CCG
F & B and consumer H & B process: inputs, outputs, purified water and clean utilities

Features & Benefits

Available with extended range I-P transducer or a SST gas regulator
Fully automated operation when used with I/P. Outlet set point pressure, and operation at full open during Rinse/CIP/Rinse cycle is controlled by PLC or DCS menu
Automated operation drastically reduces offset (droop) compared with spring loaded regulators
MK95, air-loaded design significantly reduces size and weight
Optimized diaphragm material, surface area and support system for unsurpassed performance and life

Specifications

Size: 3/4″, 1″, 1-1/2″, 2″ (DN20, DN25, DN40, DN50)
End Connections: ASME, Tri-Clamp, ASME Butt Weld, ASME Tube Weld, DIN/ISO Tri-Clamp and Tube Weld
Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv), model dependent
Max Pressure/Temperature: model dependent
Setpoint Range: 3 psi (0,2 bar) to 135 psi (9,3); dependent on size and construction
Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
Surface Finish: ASME BPE SF5, 20Ra (0,5µm) electropolish is standard, 8Ra (0,2µm) optional
Stem Seal- Diaphragm: Jorlon FDA, USP Class VI
Soft Seat Option: Selection is size and Cv dependent; Jorlon, PEEK, Teflon (all materials to FDA & USP Class VI)

Documentation

Mark 96A Series Data Sheet

Mark 96A Series Installation & Maintenance Manual

Steriflow Valve Product Overview Brochure

Steriflow Valve Product Overview Brochure - A4

Approvals

CRN (Canadian Registration Number)
PED Category 1 (Pressure Equipment Directive)
SEP Declaration (Sound Engineering Practice)
All products use FDA and USP Class VI approved soft goods and seals where possible. Consult each product data for details

STEP Files

Mark 96A Series
1″ Mark 96A Series
1-1/2″ Mark 96A Series
2″ Mark 96A Series

Notice Regarding 3D STEP Files:
The 3D STEP files provided on this website contain proprietary information and are intended solely for use by authorized customers. These files must not be used, distributed, or repurposed by third-party vendors for promotional, marketing, or any other non-customer-related activities. Unauthorized use may violate intellectual property protections and confidentiality agreements.

Your List