Mark 16IQ Series
Side Mounted I/P
The Mark 16IQ is a side mounted valve positioner. The primary module of the Mark 16IQ is the electronic board comprised of the microprocessor, along with the indicating and control elements. The unit is designed so that optional modules for alarms and position feedback are easily plugged in or snapped on. The current command is compared to the internal position feedback signal. By comparing the input and feedback signals, an adaptive controller determines the positioning signal, which follows an optimized algorithm. The parameters for this algorithm are determined from valve and actuator characteristics analyzed during initialization and as modified during the real-time performance of the actuator. The MK16IQ will identify and optimize each valve's specific performance characteristics.
- LCD digital display
- Push-button configuration
- Loop powered by 4-20 mA signal as with standard I/P positioners
- Split range functionality
- Zero air consumption in standby mode – only uses air supply when repositioning valve
- Input:
- Signal Range: 2 wire circuit ~ 4-20 mA; 3/4 wire circuit ~ 0/4-20 mA
- Load voltage: 2 wire circuit ~ > 11 V with Hart; > 10 V without Hart
- Auxiliary Voltage: 3/4 wire circuit ~ 18 – 30 V
- Output: up to full air supply pressure
- Pneumatic System:
- Air Supply Pressure: 45 psig max for Steriflow Valve actuators
- Air Capacity: > 5.3 scfm; adjustable
- Standard Consumption: 0.02 scfm independent of air supply pressure
- Ambient Temperature: -20°F to 175°F
- Shock Resistance: 10g
- FM/CSA: (IS) Class I, Div. 1, Groups ABCD, T6/T5/T4
- NEC 505: Class I, Zone 2 Group IIC T6/T5/T4
- NEC 500: Class I, Div 2 Group IIC T6/T5/T4
- EU: II 2G EEx ia/ib IIC T6/T5/T4
Your List
Email List
Get A Quote
Get Help Sizing Your Valve
Quickly and accurately determine the flow coefficient of a valve so that you can choose the proper Steriflow valve for your application.