Manual, Low to High Flow, Sanitary Pressure Regulator

The Mark 96 series is an angle style or inline, sanitary pressure reducing valve with bolted body for purified water, clean utilities and media in the biopharmaceutical, pharmaceutical, food & beverage and consumer health & beauty industries.

  • Clean steam, pressure reduction for SIP
  • Media prep: AWFI (ambient WFI) and buffer dilution
  • Bioreactor/fermenter process input control: AWFI, buffer, other additives
  • Separation input and output control: AWFI
  • Purification input and output control: AWFI, buffer
  • Clean utilities: USP PW, WFI, CIP, CCA, CCG
  • F & B and consumer H & B process: inputs, outputs, purified water and clean utilities

Sizing: 3/4″ through 3″ (DN20 through DN80)
Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv)

The Mark 96 series sanitary pressure regulator is available to ship the next business day (order must be entered by 2:00p EST) — See Steriflow Valve Express below for more details.

Features & Benefits
  • No guiding surfaces in the fluid – minimizes particulate generation
  • 100% 316L barstock body – no wetted parts made from castings
  • Best accuracy (least droop – set point offset) in the industry
  • Jorlon diaphragm – lifetime warranty
  • Tri-clamp gauge port
  • Manual CIP pin allows user to look the regulator in full open position during Rinse/CIP/Rinse cycle
Specifications
  • Size: 3/4″ through 3″ (DN20 through DN80)
  • End Connections: ASME, DIN and ISO Tri-Clamp, Extended Tube Weld
  • Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv)
  • Max. Pressure/Temperature: Dependent upon construction
  • Setpoint Range: 3 psi (0,2 bar) to 135 psi (9,3 bar); dependent on size and construction
  • Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
  • Surface Finish: ASME BPE SF5, 20Ra (0,5µm) electropolish is standard, 8Ra (0,2µm) optional
  • Diaphragm Material: Jorlon FDA, USP Class VI; EPDM/Nylon, FDA only; 316L (selection is size and Cv dependent)
  • Soft Seat Option: Jorlon, PEEK, Teflon (All FDA and USP Class VI)
Resources

Jorlon Facts and Warranty

The majority of Steriflow valves come with the Jorlon diaphragm and, of course, a lifetime diaphragm warranty.

Steriflow Valve Express Shipment

Our Steriflow Valve Express Program offers you options to get the products you need, when you need them. Many of our products are available for next business day shipment. Look for Steriflow Valve Express in the product descriptions.

Approvals
  • CRN (Canadian Registration Number)
  • PED Category 1 (Pressure Equipment Directive)
  • SEP Declaration (Sound Engineering Practice)
  • All products use FDA and USP Class VI approved soft goods and seals where possible. Consult each product data for details
  • ATEX Certified
Steriflow Valve Express

This pressure regulator is available to ship the next business day (order must be entered by 2:00p EST).

  • 3/4″: Cv = 0.05, 1.5
  • 1″: Cv = 1.5, 4.5
  • 1-1/2″: Cv = 10
  • T.C. Hard Seat, Standard Finish

Some exclusions may apply

Get A Quote

Frequently Asked Questions

1. How to install a Mark 96 series sanitary pressure regulator?

To learn how to properly assemble the Mark 96 series pressure regulator, watch our instructional video.

Visit our resource page for more product installation and maintenance videos.

2. How to repair a Mark 96 series sanitary pressure regulator?

To learn how to repair the Mark 96 series pressure regulator, watch our instructional video.

Visit our resource page for more product installation and maintenance videos.

3. When should a Mark 96 series sanitary pressure regulator be used?

The Mark 96 series sanitary pressure regulator was the first valve Steriflow created. Its primary use today is on clean steam, to reduce the pressure of clean steam from overhead distribution pressures.

For more in-depth product knowledge about the Mark 96 series sanitary pressure regulator, watch our video.

4. Can a Mark 96 series sanitary pressure regulator be used in an autoclave?

Yes, in general, you can put a Mark 96 series pressure regulator in an autoclave and sterilize up to about 275 degrees fahrenheit.

For more information about using a Mark 96 series regulator in an autoclave, watch our video.

Related Products

Mark 96AA Series

Hybrid or Automated, Jorlon Diaphragm

Mark 96A Series

Hybrid or Automated, Jorlon Diaphragm

Mark 96C Series

Manual, Low to High Flow, Jorlon Diapragm

Quick Quote

Know what you need and want a quote quickly? We can help! Fill out this form and we will get back to you shortly.