Sanitary steam trap system specifically designed to facilitate the sterilization of sanitary vessels including fermentors, bioreactors and autoclaves without the addition of a SIP heat up bypass loop.
Air loaded sanitary pressure reducing valve design to permit the user to change set points remotely via a cabinet/panel mounted air regulator or even through a distributed control system and an I-P transducer.
Sanitary air augmented pressure regulator with the same line sizes, Cv choices, seats, low droop characteristics and stability of the standard bolted bonnet Mark 96.
Clamped body sanitary pressure regulator designed to regulated downstream pressure of process and utility applications in sanitary and aseptic systems.
Designed to meet the rigid specifications for sterile process and clean utility control valves. This valve series is suitable for a wide variety of applications in the, bio-pharmaceutical, parenteral, cosmetic, dairy and food and beverage industries.
O-ring series is designed to meet the rigid specifications for sanitary process control valves for customers who prefer an o-ring style stem seal. This valve is suitable for a wide variety of applications in the bio-pharmaceutical, pharmaceutical, cosmetic, dairy and food and beverage industries.
Built originally for clean dry air and gas applications, the JSR design is hygienic enough (though not drainable) for USP Purifed water, Clean Steam and Condensate pressure regulator applications.
A line of low flow pressure regulator that have the ability to handle very high pressures and very lows. Most often used in bio-pharmaceutical and pharmaceutical research and production facilities for clean gas flow regulation.
The SC30 Sample Cooler is designed to facilitate sampling of clean steam and Water For Injection (WFI), while maintaining product sterility during testing.
The SC50 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing.
The SC60 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing. Constructed in 316L stainless steel, the SC60 is intended for permanent installation at the sampling point.
In-line sight glasses are suitable for a wide range of ASME BPE applications in high purity tubing systems typically found in the pharmaceutical or bio-pharmaceutical industry.
Sanitary subcooled condenser is a patent pending sanitary condensate chamber and steam trap assembly that was designed to replace the 12-18” downcomber (drop leg) traditionally installed between SIP temperature sensors and sanitary steam traps.
