A sanitary back pressure regulator available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile back pressure application.
Sanitary air augmented back pressure regulator with the same line sizes, CV choices, seats, low build up characteristics, and stability of the standard bolted bonnet Mark 95.
MK95FT is a sanitary "flow through" back pressure regulator. The MK95FT can eliminate a portion of the by-pass line components by allowing the back pressure regulating valve to be installed in the primary line.
Air loaded sanitary pressure reducing valve design to permit the user to change set points remotely via a cabinet/panel mounted air regulator or even through a distributed control system and an I-P transducer.
Sanitary air augmented pressure regulator with the same line sizes, Cv choices, seats, low droop characteristics and stability of the standard bolted bonnet Mark 96.
Clamped body sanitary pressure regulator designed to regulated downstream pressure of process and utility applications in sanitary and aseptic systems.
Designed to meet the rigid specifications for sterile process and clean utility control valves. This valve series is suitable for a wide variety of applications in the, bio-pharmaceutical, parenteral, cosmetic, dairy and food and beverage industries.
Built originally for clean gas back pressure applications, the JSB design is hygienic enough for liquid Buffer, and USP Purifed water back pressure applications.
Built originally for clean dry air and gas applications, the JSR design is hygienic enough (though not drainable) for USP Purifed water, Clean Steam and Condensate pressure regulator applications.
The SC30 Sample Cooler is designed to facilitate sampling of clean steam and Water For Injection (WFI), while maintaining product sterility during testing.
The SC50 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing.
The SC60 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing. Constructed in 316L stainless steel, the SC60 is intended for permanent installation at the sampling point.
In-line sight glasses are suitable for a wide range of ASME BPE applications in high purity tubing systems typically found in the pharmaceutical or bio-pharmaceutical industry.
