December 2007
Steriflow Valve Introduces the Mark 96A Series Sanitary Air Loaded Regulator
The Mark 96A is an air loaded sanitary pressure reducing valve designed to permit the user to change setpoints remotely via a cabinet/panel mounted air regulator or even through a distributed control system. and an I-P transducer.
The Mark 96A is also an ideal choice for automating the SIP/CIP process when the operating setpoint is lower than the SIP/CIP pressure levels. With remote setpoint change capability, the valve can remain fully open during the cleaning or sterilization process by simply increasing the air pressure loaded to the dome beyond the pressure of the SIP/CIP process.
- Springless design significantly reduces size and weight
- Optimized diaphragm material, surface area and support system for unsurpassed performance and life
- Valve sub-assembly same as time-tested Mark 96 design
- Reduces offset normally associated with spring loaded regulators
- Permits automated CIP/SIP
- Available with extended range I-P or SST gas regulator
Mark 96A Cutsheet
Mark 96A I & M
Contact
Kyndle McMurry
Richards Industries
513-533-7345
kmcmurry@richardsind.com
|
