February 2009
Steriflow Introduces the Mark 9020 Series Sanitary Ball Valves
The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials chosen for seats and seals to the final marking and documentation, you can trust the Steriflow name. Features include:
- Traceable industry grade high density 316L body, ball stem and end caps with <3% ferrite standard, 1% optional
- Certified TFM 1600 body seal, seat, thrust washer, and packing material meet FDA 21 CFR 177
- Documented surface finish on all wettable components is AF1 (20 Ra mechanical polish), SF4 (15 Ra mechanical/electropolish optional)
- Ball porting has identical ID as inlet/outlet tubing to prevent holdup
- Pressure ratings to 1000 psig @ 100°F
- Anti-blowout stem design
- Tongue and groove body seal to insure gasket containment and precise alignment regardless of vibration
- Inline repairable
- Tri-clamp ends, extended tube weld ends, or both available on all sizes
- Available as manual or actuated (pneumatic / electric) valve
- ISO 5211 actuator mounting flange direct on body, or on stem extensions
- Optional cavity filler seats available for non-BPE applications
Mark 9020 Series cutsheet
Contact
Kyndle McMurry
Richards Industries
513-533-7345
kmcmurry@richardsind.com
|
