Product Directory
| Mark 15 Series Top Mounted Pneumatic Valve Positioners Uses the full force of its air supply to drive and maintain the piston or diaphragm in a pneumatic actuator to position a valve to what is required by control instrument, regardless of the presence of forces that change valve position. Sanitary Control Valves Sanitary control valves designed to meet the rigid specifications for all sterile process control applications. Sanitary Low Flow Control Valves Sanitary low flow control valves designed to meet the stringent specifications for low flow sterile processes. Sanitary INLINE Control Valves New INLINE design allow for process design flexibility. You are no longer constrained by angle valve process tubing. Sanitary Pressure Regulators A range of sanitary pressure regulators designed to regulate downstream pressure while maintaining the most stringent sanitary conditions. Sanitary Air Augmented Pressure Regulators The Mark 96 Sanitary Pressure Regulator with air augmentation (AA) option. By connecting an air pressure signal to the 1/4" FNPT dome fitting via an air regulator or I/P, the set point can be changed remotely by "sending an air signal instead of a technician." Sanitary Back Pressure Regulators Back pressure regulators specifically intended for clean, bio-pharmaceutical systems where sterility and precision are required. Sanitary Bio-pharma Gas Pressure Regulators (JSR Series) High purity pressure regulators ideally suited for reducing the pressure of high purity gases, or clean dry air, commonly found in biotech and pharmaceutical applications. Sanitary Bio-pharma Gas Back Pressure Regulators (JSB Series) The JSB Series is the first fully drainable high purity gas back pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. In-Line Sight Glasses The SG Series sight glasses combine 316L stainless steel end connections with a toughened borosilicate viewing glass making them suitable for both clean-in-place (CIP) and sterilization-in-place (SIP) operations. Sample Coolers Our range of sample coolers allow clean steam and high purity water samples to be taken quickly and easily while maintaining a sterile testing environment. SSC Series Subcooled Condensers A patent-pending sanitary condensate chamber and steam trap assembly that was designed to replace the 12-18" downcomer (drip leg) traditionally installed between SIP temperature sensors and sanitary steam traps. Clean Steam Traps Typical applications for our steam traps include fermentors, bioreactors, sterilizers/autoclaves, SIP/CIP systems, process piping equipment and steam barriers. High Flow Steam Traps A thermostatic steam trap designed specifically for use in high capacity clean steam systems where sanitary conditions must be maintained. Ultra Capacity Sanitary Stem Trap System Specifically designed to facilitate the sterilization of sanitary vessels including fermentors, bioreactors and autoclaves without the addition of a SIP heat up bypass loop. Clean Steam Disc Traps Non-sanitary in the traditional sense, the exterior is polished to 20 Ra and can be used in clean washdown environments. Clean Gas Distribution Manifolds Designed for distribution of purge gas or as a distribution point for air/gas actuated valves and production equipment in a clean environment. Check Valves Vertical and horizontal check valves designed specifically for use in bio-pharmaceutical and parenteral drug manufacturing applications. Valve Positioners A range of positioners including top mounted pneumatic valve positioners and smart valve positioners. |
